How To Repair Cracked Rifle Stock With Threaded Brass Rod

Forest work is not something I really seek out, but when y'all become a rifle for a good toll that has a seemingly easy to repair stock crevice you just can't pass information technology upwards. This Finnish M39 had a crack starting only behind the magazine body and terminating merely through the wrist area on the left hand side. As the M39 has a good sized recoil lug this area should not be taking likewise much abuse from recoil simply it nevertheless is translated through those regions. A strong repair that will outlast the residual of the gun is what I'm going for hither. Acraglas came to heed equally I've used it one other time well-nigh a decade ago to bed a friction match burglarize during my more competitive minor-bore days in my youth.

Acraglas is one of those "extra label" products like WD-40 and condoms. And then many additional uses your imagination is the limit. Its a super stiff resin/epoxy mostly used for bedding rifles for accuracy but also is stiff enough for very durable repairs to pretty much anything wood,metal and some synthetics. Do a little reading on its utilize and follow the directions and you'll get good results every time.

The crack terminates here to a feather sparse border.

The area towards the lesser of the stock covered with the green X did not have the crack running through it.

I decided to install two cantankerous pins through the thicker areas of the fissure, drilling two holes and filling them with acraglas as well and coating the cantankerous pins with acraglas should make for a durable repair.

Cross holes drilled for brass cross pins

The drill bit I used was 3/32 which is the aforementioned size as the pivot, My thinking was that threads would nonetheless bite plenty to pull the stock together and not risk splitting annihilation. I should have sought out a slightly smaller drill bit that was long plenty to yet do the job. The pins did pull the stock together merely in the end the surgical tubing did most of the clamping action. No damage will come from the slightly larger holes as more of the epoxy is present in there and will fix merely the same and peradventure offer a stronger cross pin type pillar in the long run than merely a bare pin shot in with little epoxy on it due to the fit.

one/16 rod was not used but I had purchased it just in instance I decided to go with a smaller pivot.

Threaded cross pin used to pull the stock pieces together and human action equally reinforcement to the repair.

Acraglas added to the rod and inside the holes now the cantankerous pin will be run in with a cordless drill.

Since the crack was and then thin I wanted to accept some pillars of acraglas in identify so I drilled holes perpendicular to the direction of recoil and filled as well every bit worked the resin into the thin crack.

After all the areas I wish to have the acraglas in and I had run the pins in with a drill I clamped the stock using surgical tubing which does not stick to acraglas so experience costless to wrap tight and not worry besides much if you get a little squeeze out from the cracks.

Its a pretty simple process to fix stocked such as the ane pictured here. I don't desire to type too much more on the topic as there are really no rules to fixing stocks other than go ho-hum and plan ahead for each step. If you intend to bed a stock that is a slightly unlike procedure with a few more than steps, other online resources should yield ample suggestions on best practices for your project.

Source: http://wonderwolfs.blogspot.com/2016/02/stock-repair-using-acraglas-and-brass.html

Posted by: comptonsterly.blogspot.com

Share this post